Explosion-proof desalter transformer designed for crude-oil electrostatic desalting, built to withstand hazardous Zone 1 environments in oilfields, refineries, and offshore FPSO operations with stable long-term performance.
The Desalter Unit consists of a large pressure vessel, powered by a high-voltage desalting transformer. Through electrode plates and demulsifiers, it efficiently removes salt and water from crude oil.
The power transformer handles voltage step-up or step-down in power systems, with high efficiency, low loss, and reliable operation. Covering various capacities and voltage levels, it is widely used in grids, industry, and infrastructure.
ZPS-M wide-frequency transformer for ESP/VFD power interfaces, with catalog references of 250–800 kVA, 3.3 kV and 10–80 Hz. Final configuration follows approved project data.
Used with the explosion-proof desalter transformer, this device enables on-load, uninterrupted stepless voltage regulation, meeting the crude oil desalting and dehydration requirements through voltage adjustment in the desalter system.
Cast-resin and non-encapsulated dry-type solutions for buildings, rail transit and industrial distribution. Rating, voltage, insulation and cooling are confirmed per project.
For arc furnaces, refining furnaces and other high-current impact loads. Overload duty, short-circuit strength, cooling and interfaces are configured for the furnace process.
A prefabricated solution integrating high-voltage, transformer and low-voltage distribution units for industrial sites, infrastructure and utility projects.
A compact integrated arrangement for outdoor distribution and project-specific power supply. HV/LV scheme, protection and enclosure class are confirmed per project.
Introduces high voltage safely into a desalter vessel, with cross-sleeve or flexible-connection arrangements selected per project. Flange, insulation and installation interfaces require item-by-item confirmation.
For industrial distribution and outdoor operation, configured around rating, voltage level, cooling method, installation boundaries and project environmental conditions.
